Nonyl Phenol

Technical Data :

Test

Test Method

Specification

Appearance

Visual

Clear viscous liquid
without sediments

Colour, HU, (max.)

QAS-W-006
Eq. to ASTM D-1209

Purity,
percent by mass, (min.)

QAS-W-231
(G.C. Method)

99.0

DiNonyl Phenol,
percent by mass, (max.)

QAS-W-231
(G.C. Method)

1.0

Phenol,
percent by mass, (max.)

QAS-W-231
(G.C. Method)

0.1

Water content,
percent by mass, (max.)

QAS - W -009
Eq. to ASTM D-1364

0.05

Characteristic Data :

Test

Test Method

Typical Value

Specific gravity,27^oC/27^oC

QAS-W-007
Eq. to ASTM D-1209

0.945

Hydroxyl value,
mg KOH/gm

QAS-W-202
(Auto Titrator Method)

248

Distillation range,
initial boiling point, ^oC
95% to distill, ^oC

QAS-W-004
Eq. to ASTM D-1078

288
310

Note: Characteristic data provides further information about the product and is not subject to constant monitoring
Technical data are specification values and are subject to constant monitoring.

Application

NONYL PHENOL (NP) is used in the manufacture of NP- ethylene oxide condensates for application as non ionic surfactants.These condensates on subsequent sulphonation yield anionic surfactants.
NONYL PHENOL is used in the manufacture of oil soluble phenolic resin.
NONYL PHENOL is used in the manufacture of derivatives finding application as corrosion inhibitor in lubricating oils.
NONYL PHENOL esters with inorganic acids find application as flame retardants and plasticizers.
NONYL PHENOL is used in the manufacture of agricultural chemicals, aromatic oils, germicides, anti-sludge agents etc.

Packing

195 kgs nett in HDPE Drums of following dimensions :
Height	: 882 mm
Outer diameter (with lid))	: 590 ą 5 mm
Thickness	: 4 ą 0.5 mm
Tare weight	: 10.2 kgs
UN Classification Class : 9 UN No : 3082 We pack 80 drums in a 20 ft container equivalent to 16.60 MT Nonyl Phenol nett in 1 FCL for export NOTE: Although the information given in this technilet on applications is accurate to the best of our knowledge, no liability can be accepted in respect of such information and no warranties or conditions are intended in respect of the product described.